Navratri is one of the biggest windows in the Indian craft calendar for resin artists. Coasters, trays, jewellery, keychains, bookmarks — buyers are actively looking for handmade festive gifts, and they want the colours to be right. Not just pretty, but matched to the nine-day colour sequence that holds cultural meaning for most buyers.
The challenge is that matching navratri colour mica powder for resin is not as simple as picking nine random shades. Each day's colour has a specific mood — some are bold and warm, some are cool and devotional, and one or two are genuinely tricky to nail with standard pigments. Get it right, and your pieces feel intentional. Get it wrong, and buyers quietly move on to someone else's stall or listing.
This guide walks you through the exact mica shades to use for each of the nine days, how to mix and proportion them in epoxy resin, and which product combinations from Shrebhavi give you the most coverage without buying 20 separate jars.
Quick Answer: Nine Colours at a Glance
If you just need the colour map quickly, here it is. Scroll down for the full mica shade recommendations for each day.
- Day 1 – Royal Blue: Deep blue or cobalt mica
- Day 2 – Yellow/Golden: Antique gold or bright yellow mica
- Day 3 – Green: Emerald or forest green mica
- Day 4 – Grey: Silver-grey or charcoal pearl mica
- Day 5 – Orange: Orange pearl mica
- Day 6 – White/Cream: Pearl white or ivory mica
- Day 7 – Red: Deep red or crimson mica
- Day 8 – Sky Blue (Peacock Blue): Teal or peacock blue mica
- Day 9 – Pink/Purple: Rose pink or violet mica
Why the Colour Sequence Matters for Resin Sales
Most resin sellers underestimate how colour-aware Navratri buyers actually are. Women who celebrate the festival — and they are the primary gift buyers — know which day they are gifting for. A coaster set in orange lands perfectly for Day 5. The same coaster gifted on Day 2 feels slightly off.
When you label your products with the day and colour, you give buyers a reason to choose your piece over a generic one. It also helps you plan inventory: make more of the popular days (red, orange, royal blue tend to sell fastest) and fewer of the trickier ones like grey.
Navratri resin art colours also photograph beautifully because the festival palette is saturated and metallic-friendly. Mica powders with a pearl finish catch light in product photos in a way that flat pigments simply do not.
Mica Powder vs Pigment Paste for Navratri Resin Art
Both work, but they behave differently in resin. Here is a quick comparison so you can decide what suits your workflow.
| Property | Mica Powder | Pigment Paste / Liquid Pigment |
|---|---|---|
| Finish | Pearlescent, metallic shimmer | Opaque or translucent, matte to satin |
| Blending in resin | Needs thorough stirring; can clump if added dry to cold resin | Disperses faster, especially liquid form |
| Colour depth | Rich; small amount goes far | Strong; easy to overshoot |
| Navratri suitability | Excellent — the shimmer reads as festive and premium | Good for solid fills; less festive feel |
| Typical dosage in resin | 1–3% by weight of mixed resin | 2–5% by weight depending on brand |
| Shelf life (sealed) | 2–3 years easily | 1–2 years; can dry out if poorly sealed |
For navratri resin jewellery colour palette mica work — pendants, earrings, rings — mica powder is almost always the better choice. The shimmer makes small pieces look expensive without adding bulk or weight to the resin.
If you are new to working with epoxy ratios, take a look at How to Choose the Right Resin Ratio for Your First Project: 1:1 vs 2:1 Explained for Indian Beginners before you start your Navratri batch — getting the mix ratio wrong is the most common reason colours look dull or cloudy after curing.
The Nine-Day Navratri Colour Palette — Day by Day
Note: The exact Navratri colour sequence can vary slightly by region and year. The sequence below follows the most widely observed version across Gujarat, Maharashtra, and North India. Always double-check the current year's calendar closer to the festival.
Day 1 — Royal Blue
Royal blue is bold and deep. In mica terms, you want a cobalt or navy pearl — not a bright electric blue, which reads as synthetic. Mix at about 2% by weight of your combined resin. For jewellery pieces, go slightly heavier (2.5%) so the colour stays rich even in thin pours.
Day 2 — Yellow / Golden
This is where metallic powders shine. A warm golden yellow — not a neon lemon — is what buyers associate with Day 2. The Antique Gold Metallic Powder from Shrebhavi works beautifully here, giving that deep Kanchan gold tone that photographs as premium. Use 1.5–2% for coasters; go up to 3% for opaque jewellery fills.
Day 3 — Green
Emerald or forest green, not lime. A deep green mica with a slight pearl finish captures the traditional feel. If you only have a bright green, mix in a tiny pinch of black mica (literally a fingertip amount) to deepen it without muddying the colour.
Day 4 — Grey
Grey is the hardest Navratri day to sell, but the easiest to make look sophisticated. Silver-grey pearl mica in resin catches light at every angle, making it look far more interesting than flat grey. This is a great day for abstract swirl coasters where the grey picks up ambient colour from surrounding shades.
Day 5 — Orange
Orange is one of the fastest-selling Navratri colours in resin — it photographs brilliantly and feels energetic. The Orange Pearl Mica Powder (10gm) is specifically formulated for resin use and gives a warm, saturated orange with a pearlescent finish that reads as festive rather than garish. Use 2% for translucent pours; up to 3.5% for opaque fills.
Day 6 — White / Cream
White in resin is trickier than it sounds. Pure titanium white pigment can make resin look chalky. A pearl white mica gives a softer, luminous finish that looks far more intentional. Cream-toned pearl mica works especially well for coasters paired with gold veining — a combination that sells well as a Navratri gifting set.
Day 7 — Red
Deep red or crimson — not coral, not tomato. Red mica powders vary a lot in warmth. For Navratri, go for a warm burgundy-red rather than a cool blue-red. Red resin pieces sell out fast, so make extra inventory for Day 7 products early.
Day 8 — Sky Blue / Peacock Blue
Peacock blue or teal is one of the most photogenic colours in the entire navratri nine colours resin craft palette. A teal mica with gold undertones is particularly striking. This is a good day to try a two-colour pour — teal base with a gold swirl — which buyers find irresistible for trays and coasters.
Day 9 — Pink / Purple
The final day is often pink or purple depending on the regional tradition. Rose pink mica gives a soft, elegant finish for jewellery. Violet or lavender pearl mica works better for larger pieces like trays. Either way, Day 9 products tend to sell as "last day of Navratri" gifts, so have them ready early in the festival week.
Mixing Mica Powders Into Resin: Ratios and Pitfalls
Getting the navratri colour mica powder for resin to disperse evenly is the difference between a vibrant finished piece and a streaky, disappointing one. Here are the steps that actually work.
Step 1: Pre-mix the mica
Before adding mica to your mixed resin, stir the powder into a few drops of resin Part A first. This pre-disperses the particles and prevents clumping when you add Part B. This step alone eliminates most streaking problems.
Step 2: Add to fully mixed resin
Mix your resin Parts A and B thoroughly first — at least 3–4 minutes of proper scraping-the-sides stirring. Then add your pre-mixed mica paste and stir for another 60–90 seconds. Do not rush this.
Step 3: Watch your temperature
In Indian summers, resin heats up fast once mixed, especially in larger batches. This accelerates cure and can cause colours to shift or bubble. Work in batches under 200ml per pour if your room temperature is above 28°C. For more on heat-related resin problems, the article on Deep Pour vs Thin Pour Epoxy in Indian Summers: Why Your Resin Overheats in May and What to Do About It covers this in detail.
Step 4: Dosage by piece type
- Coasters (3–4mm pour): 2–3% mica by weight of mixed resin
- Jewellery (thin fills under 2mm): 2.5–4% for opacity
- Trays (5–8mm pour): 1.5–2.5%; colour deepens with thickness
- Keychains and pendants: For UV resin, 1.5–2% is usually enough
If you are working with UV resin for small Navratri jewellery pieces, the comparison guide UV Resin vs Epoxy Resin for Small Moulds: Which One Actually Works Better for Keychains, Pendants, and Jewelry in Indian Humidity? will help you decide which resin type suits your product line.
Common Pitfalls to Avoid
- Adding too much mica (above 5%) can make resin brittle after curing
- Using mica in deep pours without pre-dispersing causes it to sink and create uneven colour
- Storing mixed mica-resin for more than 15–20 minutes before pouring leads to colour separation in some shades
- Skipping a heat gun pass after pouring leaves micro-bubbles trapped in the colour layer
If your finished pieces are coming out sticky even after 24 hours, the problem is almost always in the mix ratio, not the mica. Check out Why Your Resin Is Still Sticky After 24 Hours — and How to Fix It Before You Ruin the Piece for a step-by-step fix.
Which Shrebhavi Products Cover the Full Palette
You do not need nine separate jars to cover all nine days. With smart kit selection, you can cover the full navratri colour sequence resin coasters palette with two or three purchases.
Option 1: The Multi-Set Route
The 24 Shades Pearl Mica Powder set gives you the widest coverage in a single purchase. With 24 shades, you will find suitable matches for all nine Navratri days plus extras for mixing custom tones. This is the best option if you are planning a full nine-day product line or a Navratri resin art kit to sell as a bundle.
Option 2: Targeted Additions
If you already have a basic mica collection and just need to fill gaps, pick specific shades. Orange is one colour that many basic sets underrepresent — the Orange Pearl Mica Powder (10gm) is worth having as a standalone because Day 5 orange pieces genuinely sell fast and you will go through more of this colour than you expect.
For the brown-gold tones that work for Day 2 and also for autumn-toned gifting pieces, the Coffee Pearl Mica Powder (10gm) adds a warm depth that straight gold cannot replicate — especially useful for two-tone coasters where you want a warm base under a gold swirl.
Option 3: The Starter Set
For sellers who are new to mica powders or are making Navratri resin products for the first time, the 6 in 1 Pearl Mica Powder (Set F) is a practical starting point. Six curated pearl shades give you a workable festival palette without the overwhelm of 24 options at once.
Practical Tips for Selling Navratri Resin Products
Making beautiful pieces is only half the work. Here is what actually moves inventory during the nine days.
Start Production at Least 3 Weeks Early
Epoxy resin takes 24–72 hours to cure fully depending on the product and ambient temperature. Factor in sanding, polishing, photographing, and listing time. If Navratri starts on a Tuesday, your last production batch should be poured by the previous Thursday at the latest.
Label Products by Day and Colour
"Orange Pearl Coaster" sells fine. "Day 5 Navratri Orange Pearl Coaster" sells better. Buyers searching for specific day gifts will find your listing more easily, and it signals that you understand the festival — which builds trust fast.
Bundle the Nine Days
A set of nine mini coasters — one per day's colour — is a premium gifting product that no mass manufacturer can replicate. Price it accordingly. Use a gift box and a small card explaining each day's colour significance. This kind of product typically sells at 3–4x the price of individual coasters.
Photograph on White or Gold Backgrounds
Navratri colours are saturated. A clean white background makes them pop. A gold or antique brass prop adds festive context without distracting from the piece itself. Avoid busy backgrounds that compete with the colour.
Offer Custom Colour Orders Early
Post your palette two weeks before Navratri and invite custom orders for specific days. This locks in sales before you have even made the pieces and tells you exactly which colours to prioritise in production.
Frequently Asked Questions
Which mica powder colour is used for Day 5 of Navratri in resin art?
Day 5 of Navratri is associated with orange. For resin, an orange pearl mica powder gives the best result — it is vibrant, has a festive shimmer, and photographs well. Use 2–3% by weight of mixed resin for coasters and up to 3.5% for jewellery fills where you want full opacity.
Can I use mica powder in both UV resin and epoxy resin for Navratri products?
Yes, mica powders work in both UV resin and epoxy resin. The dosage is similar — 1.5–3% by weight of resin. For UV resin in small jewellery moulds, pre-mix the mica into a drop of UV resin before adding to the mould to avoid uneven colour. UV resin cures faster, which is useful for small Navratri jewellery batches.
How many mica powder shades do I need to cover all nine Navratri colours?
You can cover all nine days with as few as six to eight shades if you mix strategically. For example, a deep blue and a teal can cover Days 1 and 8. A rose pink and a violet can cover Day 9 depending on your regional tradition. A 24-shade set gives you full coverage without any mixing compromises and is the most practical choice for a full Navratri product line.
Why does my mica powder look streaky or uneven in the cured resin?
Streaking usually happens when the mica is added directly to fully mixed resin without pre-dispersing. Always mix the mica powder into a small amount of Part A resin first, stir until smooth, then add to your combined A+B mix. Also check that your resin was mixed thoroughly before adding the mica — undermixed resin causes both streaking and sticky patches after curing.
Which Navratri colours sell best as resin products?
Based on festival demand patterns, orange (Day 5), red (Day 7), and royal blue (Day 1) tend to sell fastest as resin coasters and jewellery. Golden yellow (Day 2) does very well for trays and decorative pieces. Grey (Day 4) is the slowest seller but can be elevated with silver pearl mica and paired with gold veining to make it more appealing.
Is it safe to handle mica powder when making resin art?
Mica powder is generally considered safe for craft use, but you should avoid inhaling it. Always work in a ventilated area, wear a basic dust mask when scooping dry mica powder, and wash hands after handling. Once the mica is mixed into cured resin, it is fully encapsulated and poses no handling risk to end users — making resin jewellery and gifting products safe for buyers.
Can I mix two mica powder colours together for a custom Navratri shade?
Absolutely, and this is often the best way to get accurate Navratri shades. Pre-mix the two mica powders dry before adding to resin — this gives you a more consistent blend than mixing them separately into resin. For example, mixing a small amount of red mica into orange gives a deeper, more traditional orange-red for Day 5 in some regional traditions.
Wrapping Up
The navratri colour mica powder for resin opportunity is real and time-sensitive. Buyers are actively searching for colour-accurate, handmade festive pieces, and a well-planned nine-day palette puts you ahead of sellers who are just picking random pretty colours.
The key is to start early — both in production and in stocking your mica shades. A 24-shade set covers the full palette with room to spare, and targeted additions like orange pearl and antique gold fill the highest-demand slots. Mix carefully, pre-disperse your mica, and keep your pours under 200ml in warm conditions.
If you are building your Navratri resin product line from scratch, Shrebhavi's mica powder range is a practical starting point — the shades are formulated for resin use, the 10gm jars are the right size for testing before committing to bulk, and the multi-shade sets save you significant cost over buying individual jars.
Plan your nine-day palette now, photograph your pieces well, and label them with the day and colour significance. That combination — craft quality plus cultural awareness — is what makes Navratri resin products sell out before the festival even reaches Day 9.