5" Round Silicon Mould

The 5" Round Silicone Mould from Shrebhavi is a versatile casting mould designed for epoxy resin, UV resin, and air-dry clay projects. Its smooth interior surface ensures a glossy, bubble-free finish on your castings — no sanding or polishing needed on the face side.

At 5 inches in diameter, this mould is ideal for making resin coasters, decorative plates, wall hangings, and small trays. The flexible food-grade silicone makes demoulding easy — simply peel back the sides and pop out your finished piece without cracking or distortion.

• 5-inch circular cavity — perfect size for coasters, decorative discs, and small serving pieces
• Flexible silicone construction — releases cured resin cleanly without tearing or sticking
• Smooth inner surface — gives a mirror-like finish on the top face of your cast piece
• Compatible with epoxy resin, UV resin, and air-dry clay — one mould for multiple craft mediums
• Reusable and durable — withstands repeated pours and maintains its shape over time
• Easy to clean — leftover resin peels off once cured; rinse with water for clay or pigment residue
• Lightweight and easy to store — flexible enough to fold flat when not in use

How to Use

Place the mould on a flat, level surface before pouring. Mix your epoxy or UV resin as per the manufacturer's instructions, then pour slowly into the centre of the mould to minimise air bubbles. Use a heat gun or torch briefly over the surface to pop any remaining bubbles. Allow full cure time before demoulding — typically 24–48 hours for epoxy resin.

Safety Tips

Always wear nitrile gloves and work in a well-ventilated area when handling uncured resin. Keep resin materials away from children. Do not use this mould for food preparation after it has been used with resin or chemical pigments.