6" Round Silicon Mould

The 6-inch Round Silicone Mould from Shrebhavi is a versatile casting mould built for epoxy and UV resin projects. Whether you are making decorative coasters, wall art, trays, or personalised gifts, this mould gives you a clean, smooth finish every single time — no sanding needed on the face side.

Made from food-grade flexible silicone, the mould releases cured resin effortlessly without tearing or distorting. The 6-inch diameter is a popular size for coasters, small clocks, and decorative plates, making it a practical pick for both beginners and experienced resin artists working on small-batch orders or personal projects.

• Smooth, glossy release: Flexible silicone surface delivers a mirror-like finish on the casting face — no polishing required
• Easy demoulding: Soft silicone walls flex outward so cured resin pops out cleanly without cracking or sticking
• 6-inch diameter: Ideal size for coasters, wall clocks, decorative plates, and small resin art pieces
• Compatible with epoxy and UV resin: Works with standard two-part epoxy resin, UV resin, and casting resin available in India
• Reusable and durable: Silicone withstands repeated pours and holds its shape across many casting cycles
• Beginner-friendly: No mould release spray needed for most resin types — pour, cure, and pop out
• Customisation-ready: Add pigments, alcohol inks, dried flowers, foils, or glitter before pouring for unique results

How to Use

1. Place the mould on a flat, level surface before pouring.
2. Mix your epoxy resin as per the manufacturer's ratio and add pigments or inclusions as desired.
3. Pour slowly into the mould to minimise air bubbles. Use a heat gun or torch to pop surface bubbles.
4. Allow to cure fully (typically 24–48 hours for epoxy resin at room temperature).
5. Flex the mould gently from the edges and push the cured piece out.
6. Rinse the mould with water and mild soap before storing.

Safety Tips

• Always work in a well-ventilated area when using epoxy or UV resin.
• Wear nitrile gloves and eye protection during mixing and pouring.
• Keep resin and silicone moulds out of reach of children.
• Do not use this mould for food preparation after it has been used with resin.
• Avoid exposing the mould to open flames or temperatures above 200°C.