6" Zigzag Clock Mould

The 6" Zigzag Clock Mould is a silicone mould designed for casting resin and epoxy clocks with a bold, angular zigzag border. At 6 inches across, it strikes the right balance between display impact and desk or wall space — ideal for home décor projects, personalised gifts, and small resin businesses looking to add statement pieces to their catalogue.

The flexible silicone construction allows clean demoulding without cracking or distorting your cured piece. Use it with two-part epoxy resin, UV resin, or polyester resin. The centre is pre-marked for clock mechanism fitting, saving you the guesswork when drilling or inserting a shaft.

• 6-inch zigzag design — angular border creates a modern, eye-catching clock face that stands out from standard round or square moulds
• Flexible silicone body — peels away cleanly after curing, reducing the risk of chips or surface scratches on your resin piece
• Compatible with most resins — works with 2-part epoxy resin, UV resin, and polyester resin for versatile casting
• Pre-centred shaft hole marking — makes clock mechanism placement straightforward, even for beginners
• Reusable mould — with proper care and mould release, can be used across multiple pours without losing shape
• Great for gifting and selling — finished clocks make popular personalised gifts and handmade décor products for craft markets
• Beginner-friendly size — 6 inches is manageable for small resin batches, reducing material waste while learning

How to Use

Lightly apply a mould release spray or petroleum jelly before pouring for easier demoulding. Mix your resin according to the manufacturer's ratio, add pigments, inclusions, or dried flowers as desired, then pour slowly to minimise air bubbles. Allow full cure time before demoulding — typically 24–48 hours for epoxy resin. Once cured, insert a standard AA-battery clock mechanism through the centre and attach clock hands.

Safety Tips

Always work in a well-ventilated area when handling liquid resin or epoxy. Wear nitrile gloves and safety glasses during mixing and pouring. Keep resin materials away from children and food surfaces. Dispose of uncured resin responsibly — do not pour liquid resin down the drain.