A6 UV DTF Sticker - D214

The A6 UV DTF Sticker – D214 is a ready-to-apply transfer sticker designed for resin artists, craft enthusiasts, and small gifting businesses across India. Printed using UV DTF (Direct to Film) technology, this sticker delivers sharp lines, vivid colour, and a smooth finish that sits cleanly on most non-porous surfaces — no heat press or special tools needed.

At A6 size (roughly 10.5 × 14.8 cm), the D214 design gives you a generous transfer area, making it ideal for decorating resin coasters, tumblers, phone cases, wooden plaques, acrylic blanks, and keychains. Simply peel, press, and smooth — the transfer bonds quickly and holds up well against everyday handling.

• No heat required: Cold-press application works directly on smooth, clean surfaces — no heat gun or laminator needed.
• Vibrant UV print quality: UV DTF printing produces rich, opaque colours with fine detail that standard vinyl stickers cannot match.
• Versatile surface compatibility: Adheres well to resin, acrylic, glass, metal, ceramic, and sealed wood surfaces.
• A6 format: Approximately 10.5 × 14.8 cm — a practical size for coasters, tumblers, keychains, and small gifting items.
• Ready to use out of the packet: No weeding, no transfer tape hassle — peel the backing and press to apply.
• Durable finish: Resistant to light scratching and moisture once fully adhered; suitable for decorative and gifting use.
• Great for bulk craft projects: Order multiples to maintain consistency across a product line or gifting batch.

How to Apply

1. Clean and dry your surface thoroughly — dust or oils will reduce adhesion.
2. Peel the sticker carefully from its backing film.
3. Place it on your surface, design side down, and press firmly from the centre outward.
4. Rub evenly with a card or your fingertip to remove air bubbles.
5. Slowly peel away the top transfer film at a low angle. If any part lifts, press down again and wait a few seconds before continuing.

Safety Tips

• Keep stickers away from direct sunlight and humidity during storage to preserve print quality.
• Not recommended for flexible or heavily textured surfaces — adhesion may be poor.
• For resin pieces, ensure the resin is fully cured before applying.
• Keep out of reach of children under 3 years.