Resin 2:1 (150gm)

This 2:1 ratio epoxy resin from Shrebhavi is a reliable choice for resin artists, jewellery makers, and craft enthusiasts who want a clear, glossy finish without the guesswork. The 150gm pack — mixed as 100gm resin + 50gm hardener — is ideal for small projects, trial runs, or working in batches so your resin stays fresh and workable.

The 2:1 mix ratio by weight gives you a well-balanced working time, allowing you to add pigments, inks, dried flowers, or glitter before the resin begins to cure. Suitable for casting in silicone molds, coating surfaces, and making pendants, coasters, or decorative pieces at home or in a small studio.

• 2:1 mix ratio by weight — 100gm resin to 50gm hardener for consistent, predictable results every time
• Crystal clear cure — cures to a high-gloss, transparent finish that shows off pigments, inclusions, and layers beautifully
• 150gm starter-friendly size — perfect for jewellery, small mold castings, coasters, and surface coating projects
• Compatible with most colorants — works well with resin pigment pastes, alcohol inks, mica powders, and glitter
• Adequate working time — gives you enough open time to mix in colors and place inclusions before curing begins
• Suitable for silicone molds — releases cleanly from flexible molds used for pendants, rings, trays, and decorative shapes
• Small batch convenience — reduces waste and lets you experiment with multiple color combinations in one session

What's Included

1 × Resin 2:1 pack (150gm total) — Part A (Resin) + Part B (Hardener) in the correct 2:1 ratio by weight.

How to Use

Measure Part A and Part B by weight in a 2:1 ratio (e.g., 100gm resin + 50gm hardener). Mix slowly and thoroughly for 3–5 minutes, scraping the sides and bottom of the mixing cup. Avoid introducing excess air. Add pigments or inclusions as desired, then pour into your mold or onto your surface. Allow to cure fully at room temperature before demolding or handling.

Safety Tips

Always work in a well-ventilated space. Wear nitrile gloves and avoid skin contact with uncured resin or hardener — both can cause irritation. Keep away from children. Do not ingest. In case of skin contact, wash thoroughly with soap and water. Uncured resin is a chemical — dispose of mixing cups and tools responsibly after the resin has fully hardened.