Resin 3:1 (665gm)

This 3:1 ratio epoxy resin is formulated for casting projects that demand clarity, smooth self-levelling, and a hard, glossy finish. The 665gm pack contains resin and hardener in the correct proportion — ready to mix and pour into silicone molds, bezels, or flat surfaces without guesswork.

Suitable for hobbyists and small-batch makers working on jewellery, coasters, trays, paperweights, and decorative art, this resin cures to a water-clear finish that shows off pigments, inclusions, and embedments at their best. Mix accurately by weight or volume using the 3:1 ratio before every use.

• Crystal-clear cure: Minimal yellowing for true-colour results with pigments, inks, and dried botanicals
• 3:1 mix ratio: 3 parts resin to 1 part hardener — straightforward to measure by weight or volume
• 665gm pack: Enough for multiple coaster pours, jewellery batches, or small tray castings in one order
• Self-levelling formula: Flows evenly into mold cavities and reduces trapped air for smoother surfaces
• Hard, durable finish: Cures to a solid, scratch-resistant surface suitable for functional and decorative pieces
• Compatible with common additives: Works with alcohol inks, resin pigment pastes, mica powders, and glitter
• Versatile use: Ideal for silicone molds, open bezels, resin paintings, and embedding objects

How to Use

Measure 3 parts resin to 1 part hardener by weight for best accuracy. Mix slowly for 3–5 minutes, scraping the sides and bottom of the cup. Let the mixture rest for 1–2 minutes to release bubbles, then pour into your mold or surface. Use a heat gun or torch briefly on the surface to pop remaining bubbles. Allow to cure at room temperature (ideally 24–30°C) for 24–48 hours before demolding.

Safety Tips

Always work in a well-ventilated area. Wear nitrile gloves and eye protection when handling uncured resin and hardener. Avoid skin contact — uncured epoxy can cause irritation with repeated exposure. Keep away from children. Dispose of any mixed waste only after it has fully cured.